Mã hàng | 0 |
Thương hiệu | |
Bảo hành | |
Tình trạng HH | Mới |
Tồn kho | CÒN HÀNG |
Hệ thống chỉ đường nhanh
Giúp bạn đến shop nhanh nhất có thể
Hệ thống chỉ đường nhanh
Giúp bạn đến shop nhanh nhất có thể
Giá bán: Liên hệ
CÒN HÀNG
Bảng giá capvienthong.vn cập nhật liên tục và cam kết giá luôn tốt nhất. Vui lòng gọi 0904.608.606 hoặc yêu cầu báo giá qua email: kd@capvienthong.vn để được công bố giá nhanh nhất có thể!
Feature XAUI Electrical Interface: 4 Lanes @ 3.125Gbit/s Cooled DWDM EML Hot Z-Pluggable SC-Duplex Optical Receptacle MDIO, DOM Support APD Receiver Compliant to X2 MSA 1.0B Compliant to IEEE 802.3ae 10GBASE-ZR Application Case operating temperature: 0 to 70 °C GENERAL DESCRIPTION XGIGA’s 10Gb/s X2 transceiver module XGX2-DXX96-80D is a hot pluggable in the Z-direction module that is usable in typical router line card applications, Storage,IP network and LAN and compliant to X2 MSA.The XGX2-DXX96-80D is a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and Demux with clock and data recovery(CDR).This version of XGIGA Inc. transceiver line uses an cooled DWDM EML Laser Diode to achieve 80km over standard single mode fiber as 10GBASE-ZR of the IEEE 802.3ae. Optical Characteristics
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hãy là người đầu tiên đánh giá sản phẩm
No. | Parameters | Symbols | Min. | Typ. | Max. | Unit | Remarks |
1 | Center Wavelength (BOL) | λc | λc -25 | λc | λc +25 | pm | |
2 | Center Wavelength (EOL) | λc | λc -100 | λc | λc +100 | pm | |
3 | Signaling speed | - | 10.3125 | - | Gbit/s | ||
4 | Signaling speed variation from nominal | -100 | - | +100 | ppm | ||
5 | Optical Output Power | Pf | 0 | - | +5 | dBm | Average |
6 | Side Mode SuppressionRatio | Sr | 30 | - | - | dB | Average |
7 | Extinction Ratio | Er | 9.0 | - | - | dB | |
8 | Off Transmit Power | Poff | - | - | -30 | dBm | Average |
9 | Tx Jitter Generation(peak-to-peak) | Txj1 | - | - | 0.1 | UI | |
10 | Tx Jitter Generation(RMS) | Txj2 | - | - | 0.01 | UI | |
11 | Receiver Sensitivity | Rsense | - | -24 | dBm | ||
12 | Receiver Overload | Rro | +0.5 | - | - | dBm | Average |
13 | Receiver Return Loss | RL | 12 | - | - | dB | Average |
No. | Parameter | Symbol | Min. | Typ. | Max. | Unit | Remarks |
1 | Input High Voltage | VIH | 0.84 | - | 1.5 | V | |
2 | Input Low Voltage | VIL | -0.3 | - | 0.36 | V | |
3 | Input Pull-down Current | IIn | 20 | 40 | 120 | µA | Vih=1.2V |
4 | Output High Voltage | VOH | 1.0 | - | - | V | Pull-up=10k ohm to 1.2V |
5 | Output Low Voltage | VOL | - | - | 0.2 | V | |
6 | Pull up Resistance | RLASI | 10 | - | 22 | k ohm | |
7 | Capacitance | CLASI | - | - | 10 | pF | |
8 | Load Capacitance | CLoad | - | - | 320 | pF |
SALE CỰC MẠNH 60%